Appendix B
252 OmniSeed™ Viper Pro™ Installation & Operation Manual
TABLE 1. Boom Mapping Example
18. The “Switch Number” column to assign section control to a specific switch on a connected CAN switch box.
Multiple sections may be assigned to the same switch to allow the operator to control multiple sections.
19. Touch OK to return to the Boom Setup Summary screen. Touch OK to save the displayed section settings
and return to the Viper Pro main screen or proceed to the
Logical Wired As
Display
Character
11 L
22 1
33 2
44 3
55 4
66 5
79R
88 *
97 *
To Next Page
Loading...
