Raymarine A series - User Manual

Other manuals for Raymarine A series

Questions and Answers:

A
Amanda CarterAug 28, 2025
What to do if my Raymarine A series Marine Equipment product will not boot up (re-boot loop)?
- Q
  quinnrandyAug 28, 2025
  If your Raymarine product is stuck in a reboot loop, the issue might stem from the power supply and connection, so check the solutions for ‘Products does not turn on or keeps turning off’. Another potential cause is software corruption. In that case, try re-flashing the latest software from the Raymarine website. As a last resort on display products, you can perform a ‘Power on Reset’. Be aware that this will erase all your settings, presets, and user data, reverting the unit to factory defaults.
X
xchangSep 15, 2025
Why do I have no media player control on my Raymarine A series?
- C
  Christina HumphreySep 15, 2025
  If you have no media player control on your Raymarine Marine Equipment, it may be because the media player device is not compatible with the Bluetooth AVRCP protocol (version 2.1 or higher). Check the Bluetooth AVRCP compatibility with the device manufacturer. If the device is not Bluetooth AVRCP compatible then it is not suitable for wireless use with the multifunction display. Also, ensure that “Audio Control” is enabled on the multifunction display (Homescreen: > Set-Up > System Settings > Connections > Connections Manager > Audio Control > On).
D
David GonzalesAug 29, 2025
Why does my Raymarine A series show a “No Fix” GPS status?
- T
  Timothy CraneAug 29, 2025
  If the Raymarine Marine Equipment displays a “No Fix” GPS status icon, it could be due to several reasons. The geographic location or current conditions might be preventing a satellite fix; in this case, check periodically to see if a fix is obtained in better conditions or another geographic location. Alternatively, there may be a GPS connection fault, so ensure that external GPS connections and cabling are correct and fault free. Finally, the external GPS antenna might be poorly positioned, so ensure the GPS antenna has a clear view of the sky.
K
karawadeAug 29, 2025
What to do if Raymarine A series shows no data or scanner message?
- A
  apotterAug 29, 2025
  If you have no data or are receiving a 'No scanner' message on your Raymarine Marine Equipment, begin by checking the scanner power supply cable to ensure it is sound and that all connections are tight and free of corrosion. Check the relevant fuses and breakers. Ensure the power source provides the correct voltage and sufficient current, using a voltage booster if needed. Verify that the scanner is correctly connected to a Raymarine network switch or SeaTalkhs crossover coupler, as applicable, and check the status of the Raymarine network switch. Make sure SeaTalkhs/RayNet cables are free from damage and the scanner pedestal switch is in the ON position. If a software mismatch between equipment is suspected, contact Raymarine technical support.
R
russell06Aug 29, 2025
Why is instrument data missing from all Raymarine A series Marine Equipment displays?
- A
  Allison GrahamAug 29, 2025
  If instrument, engine, or other system data is unavailable at all displays on your Raymarine Marine Equipment, check the data bus (e.g., SeaTalkng) wiring and connections to ensure data is being received at the display. Verify the overall integrity of the data bus (e.g., SeaTalkng) wiring. Check the source of the missing data (e.g., ST70 instrument or engine interface) to ensure it is operating. Also, check the power to the SeaTalk bus. If a software mismatch between equipment is suspected, contact Raymarine technical support.
C
coxleonardSep 22, 2025
How do I correct an incorrect target bearing on my Raymarine Boating Equipment radar screen?
- M
  Melissa FlemingSep 22, 2025
  If the bearing of a target on the radar screen is incorrect, the radar bearing alignment requires correcting. Check and adjust the radar bearing alignment.
D
diana74Sep 13, 2025
What to do if there is no Raymarine app on my device for Marine Equipment?
- B
  bradleyortizSep 13, 2025
  If there is no Raymarine app on your device, download the required Raymarine app from the relevant application store and start the Raymarine app on your device. Ensure that Mobile applications are enabled on the multifunction display by selecting either “Viewing only” or “Remote Control” (Homescreen: > Set-Up > System Settings > Wireless Connections > Mobile Apps).
C
christopherrangelSep 10, 2025
Why is video not displayed on my Raymarine A series Marine Equipment?
- L
  lcampbellSep 12, 2025
  If the video is not displayed on your Raymarine Marine Equipment, it might be because the camera is in Standby mode. Use the camera controls to “wake” the camera from standby. Check thermal camera video cables are sound and properly connected, ensuring the video is connected into video input 1 at the multifunction display or GVM. Ensure the correct video input is selected at the display. Check the power connections to the camera and JCU / PoE injector (if used), ensure that the power switch / breaker is on, and check the fuse / breaker state.
K
Kathleen CookAug 31, 2025
Why are the controls on my Raymarine A series erratic?
- K
  kentrobertAug 31, 2025
  If you are experiencing erratic or unresponsive controls on your Raymarine Marine Equipment, check that the controller and thermal camera are correctly connected to the network. Verify the status of the Raymarine network switch and ensure that SeaTalkhs/RayNet cables are free from damage. Ensure that no other controllers are in use at the same time to avoid control conflicts. Check the power/network cabling to the controller and PoE injector (if PoE is only used with optional Joystick Control Unit). If available, check other controllers to eliminate the possibility of a more fundamental camera fault.
A
aaronmontgomeryAug 31, 2025
Why is the image on my Raymarine Marine Equipment too dark?
- P
  Paul EricksonAug 31, 2025
  If the image on your Raymarine Marine Equipment is too dark or too light, use the brightness controls at the display to adjust accordingly. Adjust the contrast and brightness of the image using the appropriate menu in the thermal camera application. A different Scene Mode setting may be more appropriate for the current conditions; use the SCENE button to adjust.

Raymarine A series Specifications

General

Display Type	LCD
Chartplotter	Yes
Display Size	7"
Display Resolution	800 x 480 pixels
GPS	Yes
Sonar	Yes
Cartography	Navionics, C-MAP
Radar Support	Yes
Waterproof Rating	IPX6

Summary

Chapter 1: Important Information

Certified Installation

Recommends certified installation by an approved installer for enhanced warranty benefits.

Disclaimers

Product is an aid to navigation, not a replacement for official charts; accuracy is not warranted.

Memory Cards and Chart Cards

Information on using microSD cards for data backup, archiving, and chart data.

EMC Installation Guidelines

Guidance on minimizing electromagnetic interference for optimal system performance.

RF Exposure

Information on FCC/IC RF exposure limits and antenna placement.

FCC Compliance and Interference Statements

FCC compliance statement and interference statement regarding FCC rules.

Industry Canada Compliance

Compliance statement regarding Industry Canada license-exempt RSS standards.

Japanese Approvals

Information regarding frequency bands and potential interference with other radio stations.

Third-Party Software License Agreements

Lists third-party software licenses applicable to the product.

Suppression Ferrites

Importance of ferrites for correct EMC performance and proper installation.

Connections to Other Equipment

Requirement for suppression ferrites on non-Raymarine cables.

Declaration of Conformity

Declares product compliance with R&TTE directive 1999/5/EC.

Product Disposal

Guidance on disposing of the product according to the WEEE Directive.

Pixel Defect Policy

Policy regarding the display of wrongly-illuminated pixels.

Warranty Registration

Instructions on how to register product ownership online for full warranty benefits.

IMO and SOLAS

States equipment is for leisure marine boats, not covered by IMO/SOLAS regulations.

Technical Accuracy Disclaimer

Disclaimer regarding accuracy and continuous product improvement.

Chapter 2: Document and Product Information

Handbook Information

Details the scope and applicability of the handbook for Raymarine multifunction displays.

Handbook Conventions

Explains conventions used for icons, menus, applications, and controls within the handbook.

Handbook Illustrations Note

Notes that illustrations may differ slightly from the specific display model.

Product Overview: Display Variants

Details display variants for a Series, c Series, and e Series MFDs, including features.

System Feature Highlights

Lists key features for connecting and controlling a complete marine electronics system.

Chapter 3: Planning the Installation

System Integration Overview

Details compatibility with various marine electronics devices and protocols.

Installation Checklist

Lists the essential activities involved in installing the system.

Multiple Data Sources (MDS) Overview

Explains MDS for managing data conflicts and selecting preferred data sources.

Identifying Your Display Variant

Steps to discover the specific model of the multifunction display.

Networking Constraints

Outlines limitations for general, master/repeater, and specific network connections.

Typical Systems Configurations

Provides examples of basic and expanded system configurations.

System Protocols

Details data protocols like SeaTalkhs, SeaTalkng, NMEA 2000, SeaTalk, and NMEA 0183.

Data Master Role

Explains the function of the data master in a networked system.

Parts Supplied: a6 x and a7 x

Lists the items supplied with a6x and a7x variant MFDs.

Parts Supplied: a9 x and a12 x

Lists the items supplied with a9x and a12x variant MFDs.

Parts Supplied: e7; e7 D

Lists the items supplied with e7 / e7D multifunction displays.

Parts Supplied: c Series and e Series

Lists items supplied with c Series and e Series (excl. e7/e7D) MFDs.

Tools Required for Installation

Lists the necessary tools for product installation.

Selecting a Location

Guidance on selecting a suitable location considering ventilation, mounting, and interference.

Chapter 4: Cables and Connections

General Cabling Guidance

Important considerations for cable types, routing, strain relief, and circuit isolation.

Connections Overview

Details available connections on various Raymarine multifunction displays.

a9 x and a12 x Connections Overview

Outlines the connections available on the a9x and a12x variant MFDs.

Power Connection: a6 x and a7 x

Explains power connection details, including distribution and grounding for a6x/a7x models.

Power and Data Connection

Details the combined power/data cable connection, including distribution and grounding.

Network Connections

Explains how to connect compatible devices using the Network connector.

Keypad Connection

Describes connecting a remote keypad directly or via a network switch.

Radar Connection

Details how to connect Raymarine Non-HD digital radomes and HD/SuperHD radar scanners.

Sonar Connection

Explains how to connect sonar modules and transducers for the Fishfinder application.

Thermal Camera Connection

Provides instructions for connecting thermal cameras to the display.

IP Camera Connections

Details how to connect IP cameras to the multifunction display.

Weather Receiver Connection

Explains how to connect a Sirius XM weather receiver.

Fusion Link Connection

Describes connecting a Fusion 700 series marine entertainment system.

GPS Connection

Explains connecting internal or external GPS receivers using SeaTalkng or NMEA 0183.

GA150 Connection

Details connecting the GA150 antenna to improve GNSS reception.

AIS Connection

Explains how to connect AIS units using SeaTalkng or NMEA 0183.

Fastheading Connection

Details connecting a fastheading sensor for MARPA functions.

SeaTalkng Connections

Outlines connecting to a SeaTalkng network for instruments and autopilots.

NMEA 2000 Connection

Explains connecting to NMEA 2000 devices using SeaTalkng.

SeaTalk Connection

Describes connecting SeaTalk devices using the optional SeaTalk to SeaTalkng converter.

NMEA 0183 Connection

Details connecting NMEA 0183 devices using the power and data cable.

a6 x and a7 x to NMEA 0183 DSC VHF Radio Connection

Explains connecting MFDs to a DSC VHF radio via a SeaTalkng to NMEA 0183 converter.

Camera; Video Connection

Describes connecting cameras or video devices to c Series and e Series MFDs.

Camera; Video In-Out Connection

Details connecting cameras or external displays to e Series MFDs (excluding e7/e7D).

Media Player Connection

Explains connecting a Bluetooth-compatible media player for wireless control.

Bluetooth Remote Control Connection

Describes connecting a Raymarine remote control wirelessly via Bluetooth.

Wi-Fi Connections

Information on connecting to Raymarine mobile apps using Wi-Fi.

Chapter 5: Mounting

Mounting: a Series Displays

Instructions for surface and bracket mounting of a Series displays.

Mounting: c Series and e Series Displays

Instructions for surface and bracket mounting of c Series and e Series displays.

Chapter 6: Getting Started

Display Power Management

Procedures for powering the display on, off, and using PowerSave mode.

a Series Controls Overview

Details the touchscreen, power, and card reader slot for a Series displays.

e7; e7 D Controls Overview

Details touchscreen, menu, UniControl, back, power, and card reader for e7/e7D.

c;e Series Controls Overview

Details controls for c/e Series displays, including UniControl and touch icons.

Homescreen Overview: Touch-Only Displays

Explains the homescreen as a central access point for applications and data.

Homescreen Overview: c Series; e Series

Details homescreen for c/e Series, including status symbols and access.

Pages: Customization and Layout

Information on creating, customizing, and moving pages on the homescreen.

Application Overviews

Overview of available applications like Chart, Fishfinder, Radar, and Data.

Splitscreen Controls

Instructions on how to switch between applications in splitscreen view.

Screen Overview: Elements and Menus

Explains display screen elements: Home, Databar, Status bar, Menus, Context menu.

Basic Touchscreen Operations

Details touch operations: cursor movement, touchscreen lock, and control dialogs.

Multi-Touch Gestures

Explains multi-touch gestures like Pinch to Zoom.

Initial Setup Procedures

Guides through startup wizard, additional settings, display brightness, and minimum safe depth.

GPS Status Information

Explains how to view GPS status, satellite info, and position fix data.

Enabling Autopilot Control

Steps to enable autopilot control for SeaTalk, SPX, and Evolution autopilots.

Engine Identification

How to display engine data and run the Engine identification wizard.

Enabling AIS Functions

Steps to enable AIS functions by connecting the unit to NMEA Port 1.

Shared Preferences

How MFDs and instruments share user preference settings across a network.

Software Updates

Instructions for downloading and installing software updates from the Raymarine website.

Learning Resources

Information on accessing video tutorials, training courses, FAQs, and technical support forums.

Chapter 7: System Checks

GPS Check Procedure

How to check GPS operation using the chart application.

Radar Check Procedure

Steps for checking radar operation and bearing alignment.

Sonar Check Procedure

Guide to selecting sonar channels, transducers, and checking sonar operation.

Thermal Camera Setup and Checks

Instructions for setting up and checking the thermal camera's main functions.

Chapter 8: Managing Display Data

Memory Cards and Chart Cards

Information on compatible microSD cards, speed ratings, and chart cards.

Memory Card Operations: a6 x and a7 x

Instructions for inserting and removing memory or chart cards on a6x and a7x models.

Memory Card Operations: a9 x and a12 x

Instructions for inserting and removing memory or chart cards on a9x and a12x models.

Memory Card Operations: c and e Series

Instructions for inserting and removing memory or chart cards on c and e Series models.

Saving User Data and Settings

How to save waypoints, routes, tracks, and settings to a memory card.

Save and Restore Items

Details data items and settings savable to/restorable from a memory card.

Screenshots: Taking and Viewing

How to take and view screenshots of the display.

Resetting Your System

Procedures for resetting system settings and data to factory defaults.

Chapter 9: Customizing Your Display

Language Selection

How to select the operating language for the system.

Boat Details Configuration

Customizing settings like boat type, number of engines, and fuel tanks.

Units Setup

Specifying preferred units of measurement for distance, speed, depth, etc.

Time and Date Setup

Specifying the preferred format for time and date display.

Display Preferences

Customizing general display behavior like starting page, key beep, and cursor autohide.

Databar and Databox Overview

Customizing data displayed in the databar and onscreen databoxes.

List of Data Items

Details available data items for display in the Data application.

System Setup Menus Overview

Overview of menus for configuring display and external devices.

Chapter 10: Document Viewer Application

Document Viewer Overview

Explains how to view and search PDF documents on the multifunction display.

Chapter 11: Autopilot Control

Autopilot Control Overview and Features

Details how autopilots can be controlled directly from the MFD.

Enabling Autopilot Control

Steps to enable autopilot control for SeaTalk, SPX, and Evolution autopilots.

Engaging the Autopilot

Procedures for engaging the autopilot using pilot button, chart menu, or context menu.

Adjusting Current Locked Heading

How to adjust the locked heading in Auto mode via Pilot Control dialog or Pilot Bar.

Disengaging the Autopilot

Procedures for disengaging the autopilot using power button, shortcuts, pilot button, or chart application.

Manually Displaying Pilot Control Dialog

How to open the Pilot Control dialog from homescreen or chart application.

Pilot Control Dialog Modes

Explains the Pilot Control dialog for standby, auto, and starting navigation modes.

Pilot Bar Functionality

Describes the Pilot Bar for displaying autopilot status information.

Pilot Setup Procedures

Details the Pilot Set-up page for Evolution autopilots.

Pilot Settings Configuration

Explains vessel settings, drive settings, sail boat settings, and commissioning for Evolution autopilots.

Autopilot System Commissioning

Outlines procedures for commissioning the autopilot system.

Autopilot Status Symbols

Explains the autopilot status symbols indicated in the databar.

Autopilot Alarms Management

Details autopilot alarms and how to silence them.

Chapter 12: Alarm Management

Alarms Overview

Explains how alarms alert users to hazards and their severity coding.

Alarm Manager Overview

Details how to configure alarm behavior and manage alarm activity.

Alarm Options: Safety and General

Lists safety and general alarm options and their settings.

Chapter 13: Man Overboard (MOB)

Man Overboard (MOB) Function

Explains using the MOB function to mark position and activate alarm.

Chapter 14: DSC VHF Radio Integration

DSC VHF Radio Integration

Details connecting DSC VHF radio for distress message info and GPS position.

Enabling DSC VHF Radio Integration

Steps to enable DSC alert display in system settings.

Chapter 15: Fuel Manager

Fuel Manager Overview

Explains fuel manager for estimating fuel remaining, distance, and time to empty.

Chapter 16: AIS Function

AIS Overview

Explains AIS for receiving vessel info and displaying targets in chart/radar.

AIS Prerequisites

Lists necessary AIS hardware and GPS setup for functionality.

AIS Context Menu

Details AIS target information and menu items accessible via the context menu.

Enabling AIS

Steps to enable AIS overlay in Chart and Radar applications.

Displaying AIS Vectors

How to display AIS vectors, indicating target prediction and turn direction.

AIS Status Symbols

Explains AIS status symbols shown in the databar.

AIS Silent Mode

How to disable AIS transmissions while still receiving data.

AIS Target Symbols

Describes various symbols used to represent different AIS target types.

Displaying Detailed AIS Target Information

How to view detailed AIS target information from chart or radar.

Viewing All AIS Targets

Procedures to view all AIS targets and their detailed information.

Using AIS to Avoid Collisions

How to use Safe Zones and Safety Messages to prevent collisions.

Target Options

Describes target options like Vector Length and Target History for Chart and Radar.

AIS Alarms

Details AIS alarms for dangerous or lost targets.

Buddy Tracking Feature

Feature to add friends/contacts to a Buddy List for tracking.

Chapter 17: Waypoints, Routes and Tracks

Waypoints Overview

Information on placing, navigating, and managing waypoints.

Routes Management

Explains building, navigating, and managing routes.

Tracks: Creating, Reviewing, Editing

Details how to create, review, and edit tracks.

Import and Export Waypoints, Routes, Tracks

Information on importing and exporting data using a memory card.

Storage Capacity: Waypoints, Routes, Tracks

Details the storage capacity for waypoints, routes, and tracks.

Chapter 18: Chart Application

Chart Application Overview and Features

Details features for route planning and navigation, including charts and waypoints.

Electronic Charts Overview

Explains world base maps, electronic charts, and LightHouse/Navionics chart compatibility.

Navigation Options

Outlines navigation features: Pilot Controls, Goto Cursor, Follow Route, and Build Route.

Chart Ranging and Panning

Explains how to zoom and pan the chart area using various controls.

Chart Selection

How to select the cartography type to be used in the Chart application.

Vessel Position on Chart Display

Explains how the vessel symbol is displayed and how to locate your vessel.

Chart Orientation Modes

Details chart orientation modes: Head-Up, North-Up, and Course-Up.

Chart Motion Modes

Explains motion modes: Relative Motion, True Motion, and Auto Range.

Chart Views: 2 D and 3 D

How to switch between 2D and 3D chart views.

Chart Display Detail Levels

Determines the level of detail displayed on the chart.

Overlays: AIS, Radar, Aerial, NOWRad, etc.

Describes chart overlays like AIS, Radar, Aerial, NOWRad, Databoxes, and Chart Grid.

Chart Vectors: Heading, COG, Wind, Tide

Explains how to enable and disable chart vectors for heading, COG, wind, and tide.

Cartography Objects: On;Off Settings

Details how to switch on/off cartographic objects like rocks, nav marks, and routing systems.

Object Information Display

How to view detailed information about specific cartographic objects.

Depth & Contour Options

Settings for displaying depth soundings and contours.

My Data Options: Waypoints, Routes, Tracks

Access to user data including waypoints, routes, and tracks.

Multiple Chart Synchronization

Synchronizing heading, range, and position across multiple chart views.

Measuring Distances and Bearings

How to measure distances and bearings using the databar and context menu.

Chapter 19: Fishfinder Application

Fishfinder Overview and Features

Details the Fishfinder application, sonar module, transducer, and features.

Sonar Technologies Explained

Explains Traditional, CHIRP, DownVisionTM, and SideVisionTM sonar technologies.

Raymarine Sonar Modules

Lists Raymarine sonar modules and their specifications.

Multiple Sonar Module Support

How to select sonar channels and display multiple channels using custom pages.

Sonar Crosstalk Interference

Explains SideVision and multiple sonar crosstalk interference and how to reduce it.

Custom Channels Creation

How to create, rename, and delete custom sonar channels.

Interpreting the Sonar Image

How to interpret the bottom structure and factors influencing the sonar display.

Depth Range Function

How to define the depth range displayed in the Fishfinder application.

SideVisionTM Range Adjustment

How to define the distance displayed to the left and right of the vessel.

Fishfinder Scrolling Control

How to pause scrolling or adjust scroll speed for placing waypoints.

Fishfinder Display Modes

How to select display modes like None, Zoom, A-Scope, and Bottom Lock.

SideVisionTM Views Selection

How to select Left, Right, or Both views for SideVisionTM channels.

Presentation Menu Options

Details options for Target Depth ID, Depth Lines, Range Lines, White Line, Bottom Fill, Color Palette, Scroll Speed, Gain controls, and Databoxes.

Depth and Distance Measurement with VRM

How to use Variable Range Markers (VRM) to determine object depth and distance.

Waypoints in Fishfinder Application

How to place waypoints in the Fishfinder application for marking positions.

Sensitivity Settings

Accessing features to enhance displayed info: Gain, Color Gain, Contrast, TVG, Noise Filter, Power Mode.

Fishfinder Alarms Setup

Setting up alarms for fish detection, deep water arrival, and shallow water arrival.

Frequency Tuning

Explains how to fine-tune transducer frequencies for optimal sonar performance.

Sounder Set-up Menu Options

Details options in Sounder set-up: Ping Rate, Tune Frequency, Interference Rejection.

Transducer Set-up Menu Options

Lists options for setting up transducers: type, offsets, and speed.

Resetting the Sonar

How to reset the sonar unit to its factory default values.

Chapter 20: Data Application

Data Application Overview

Explains how the Data application enables viewing system and instrument data.

Selecting Datapages via Touch

How to scroll through available pages using the touchscreen.

Selecting Datapages (Non-Touch)

How to select datapages using non-touch controls like the joystick.

Customizing the Data Application

How to customize datapages, content, order, and settings.

List of Data Items

Details available data items for display in the Data application.

Engine Identification Process

How to display engine data and run the Engine identification wizard.

Setting Boat Details

How to change vessel settings like boat type and number of engines.

Setting Maximum Engine RPM

How to set the maximum RPM range for the RPM data item.

Color Theme Selection

How to switch the color theme between light and dark.

Units Setup Configuration

Specifying preferred units of measurement for distance, speed, depth, etc.

Resetting Minimum and Maximum Readings

How to reset minimum and maximum readings for data items.

Resetting All Datapages

How to reset all datapages to factory defaults.

Chapter 21: Radar Application

Radar Application Overview and Features

Explains how RADAR works, its features, and target interpretation.

Multiple Radar Scanners Support

Details support for up to 2 radar scanners and simultaneous display.

Radar Scanner Status Symbols

Explains the radar scanner power mode status symbols in the databar.

Radar Context Menu

Provides positional data and menu items for cursor location.

Radar Range and Image Quality

Discusses factors affecting radar image quality: echoes, clutter, interference.

Target Tracking: Guard Zone, VRM;EBL, MARPA

Explains Guard Zone, VRM/EBL, and MARPA for tracking targets and avoiding collisions.

Measuring Distances, Range, and Bearing

Methods for measuring distances, ranges, and bearings using range rings and cursor.

Radar Modes and Orientation

Details radar orientation (Head-Up, North-Up, Course-Up) and motion modes (Relative, True).

Radar Presentation Menu Options

Lists options for Dual Range, Orientation, Motion Mode, Waypoints, and enhancing echoes.

Radar Tuning: On-Screen Gain Controls

How to use on-screen controls for Gain, Rain, and Sea clutter tuning.

HD and SuperHD Radar Adjustments

Details presets and functions for improving HD and SuperHD radar picture quality.

Non-HD Digital Radomes Adjustments

Explains gain presets and functions for non-HD digital radomes.

Dual Range Radar Operation

How to view 2 ranges simultaneously in separate windows with SuperHD and HD scanners.

Radar Scan Speed

How to set radar scan speed for SuperHD and HD radomes.

Radar Set-up Menu

Options for configuring radar scanner performance and behavior.

Resetting the Radar

Steps to reset radar settings to defaults.

Chapter 22: Camera Application

Camera Application Overview and Features

Details viewing analog and IP camera feeds and associated features.

Changing the Camera Feed

How to change the displayed video feed using touch or joystick.

Displaying Multiple Camera Feeds using Quad View

How to set Camera application to Quad View for simultaneous display of 4 feeds.

Camera Cycling Function

How to set automatic cycling of available feeds at specified time intervals.

Naming Camera; Video Feeds

How to name camera feeds to distinguish them.

Adjusting the Video Image

How to adjust image settings like contrast, brightness, and color.

Selecting the Aspect Ratio

How to manually change the aspect ratio between 4:3 and 16:9.

Selecting Location to Store Recordings

How to select a location (memory card or internal storage) for recordings.

Record and Playback Functionality

How to record live IP camera feeds and play them back.

Taking Photos

Methods for capturing still images from camera feeds.

Viewing Photos

How to view photos taken using the Camera application.

Chapter 23: Thermal Camera Application - Pan and Tilt Cameras

Thermal Camera Application Overview

Explains controlling and displaying thermal camera images.

Thermal Camera Image Display

Details the thermal camera video feed and status icons.

Controls Overview

Lists controls for the thermal camera application.

Camera Control Functions

Procedures for powering up, standby, pan, tilt, and zoom.

Image Adjustments

How to adjust contrast, brightness, color, and use scene presets.

Pan and Tilt Camera: New Interface

Menu options for pan and tilt cameras with the new interface.

High Power and High Torque Modes

Details power consumption for high power and high torque modes.

Pan and Tilt Camera: Old Interface

Menu options for pan and tilt cameras with the old interface.

Chapter 24: Thermal Camera Application - Fixed Mount Cameras

Thermal Camera Application Overview

Explains controlling and displaying thermal camera images for fixed mount cameras.

Thermal Camera Image Display

Details the thermal camera video feed and status icons.

Controls Overview

Lists controls for the thermal camera application.

Camera Control Functions

Procedures for powering up, standby, and pausing the thermal camera image.

Image Adjustments

How to adjust contrast, brightness, color, and use scene presets.

Fixed Mount Camera Menu

Menu options for fixed mount thermal cameras.

Chapter 25: Fusion Link Application

Fusion Link Overview

Details controlling a connected 700 series Fusion entertainment system.

Media Sources Selection

Describes layout and controls for iPod, USB, DVD, and AM/FM radio sources.

Browsing Music

How to browse music on connected iPod or USB devices.

Selecting Shuffle and Repeat Functions

How to set repeat folder or shuffle play order for Fusion link application.

Adjusting Volume Levels per Zone

How to adjust volume individually or for all zones simultaneously.

Selecting the Zone to Control

How to select which zone the main screen will control.

Adjusting Tone Controls

How to adjust Bass, Middle, and Treble tone controls.

Selecting the System to Control

How to select which Fusion entertainment system the application will control.

Menu Options Overview

Lists menu options for Browse Music, Repeat, Shuffle, Tone Controls, Select Fusion system, Preset, Scan.

Chapter 26: Weather Application (North America)

Weather Application Overview

Describes overlaying weather graphics on a world map for North America.

Weather Application Setup

Steps required before using the weather application for the first time.

Weather Application Display Overview

Illustrates main features of the weather application display and weather symbols.

Weather Map Navigation

How to move around the weather map and place waypoints.

Weather Context Menu

Provides positional data and options to view weather reports from cursor location.

Weather Information Display

How to view weather data for specific location, observation station, or city.

Weather Reports Access

How to view various weather reports like Tropical statements and Marine warnings.

Animated Weather Graphics

How to view animated weather graphics for NOWRad, Wind, Waves, and Pressure.

Weather Application Menu Options

Lists options available in the weather application menu.

Glossary of Weather Terms

Definitions of common weather terms used in the application.

Chapter 27: Sirius Audio Application (North America only)

Sirius Audio Overview

Details controlling a connected Sirius marine weather/satellite radio receiver.

Chapter 28: Mobile Applications

Raymarine Mobile Apps Overview

Information on Raymarine mobile apps for viewing and control via Wi-Fi.

Enabling Wi-Fi Connection

Steps to enable Wi-Fi on the multifunction display.

Enabling Mobile Apps

How to enable mobile apps for video streaming or remote control.

Setting Up Wi-Fi Security

How to encrypt Wi-Fi connections to prevent unauthorized access.

Selecting a Wi-Fi Channel

How to manually specify a Wi-Fi channel if experiencing streaming difficulties.

Chapter 29: Maintaining Your Display

Service and Maintenance Recommendations

Recommends authorized dealer service and routine equipment checks.

Product Cleaning Procedures

Best practices for cleaning the display screen, case, and sun cover.

Chapter 30: Troubleshooting

Troubleshooting General Information

Provides possible causes and corrective actions for common marine electronics installation problems.

Power Up Troubleshooting

Addresses problems encountered at power up, like the system not starting.

Radar Troubleshooting

Details common radar problems and solutions, including no data or incorrect bearing.

GPS Troubleshooting

Troubleshooting steps for GPS issues like 'No Fix' status.

Troubleshooting Autorouting

Addresses warnings and issues encountered when using Autorouting.

Sonar Troubleshooting

Troubleshooting steps for sonar data issues like no data or problematic readings.

Sonar Crosstalk Interference

Explains SideVision and multiple sonar crosstalk interference and reduction methods.

Thermal Camera Troubleshooting

Addresses common thermal camera problems: no video, erratic controls.

System Data Troubleshooting

Troubleshooting issues with data shared between connected equipment.

Video Troubleshooting

Addresses problems with video inputs, such as no signal message.

Wi-Fi Troubleshooting

Troubleshooting common Wi-Fi connection issues with mobile apps.

Bluetooth Troubleshooting

Troubleshooting common Bluetooth connection issues.

Touchscreen Troubleshooting

Addresses touchscreen issues like it not operating as expected.

Touchscreen Alignment Procedure

Procedure to realign the touchscreen for better accuracy.

Miscellaneous Troubleshooting

Covers other common problems like display behaving erratically.

Chapter 31: Technical Specification

a Series Physical and Power Specifications

Physical and power specifications for a Series MFDs.

c and e Series Physical and Power Specifications

Physical and power specifications for c and e Series MFDs.

Chapter 32: Technical Support

Raymarine Customer Support

Contact info for Raymarine customer support: web, phone, email.

Learning Resources: Videos, Courses, FAQs

Information on accessing video tutorials, training courses, and FAQs.

Third-Party Support Contacts

Contact and support details for third-party suppliers: Fusion, Navionics, Sirius.

Chapter 33: Spares and Accessories

Digital ClearPulse Transducers and Accessories

Lists Digital ClearPulse transducers and accessories connectable to sonar variant MFDs.

DownVisionTM Transducers and Accessories

Lists DownVisionTM transducers and accessories connectable to DownVisionTM variant MFDs.

Network Hardware Components

Details network hardware: HS5 and RJ45 SeaTalkhs network switches.

Network Cable Connector Types

Describes the two network cable connector types: SeaTalkhs and RayNet.

RayNet to RayNet Cables and Connectors

Lists RayNet to RayNet adapter cables and connectors.

Network Cable Types: SeaTalkhs

Details SeaTalkhs network and patch cable types.

SeaTalkng Cabling Components

Lists SeaTalkng cabling components and their purposes.

SeaTalkng Cables and Accessories

Lists SeaTalkng cables and accessories for compatible products.

SeaTalk Accessories

Lists SeaTalk cables and accessories.

e9 and e12 Video Cables

Specifies the video cable required for e9/e12 variant MFDs.

a Series Spares

Lists spare parts for a Series MFDs.

c Series and e Series Spares

Lists spare parts for c Series and e Series MFDs.

Appendix A: Connectors and Pinouts

Power, Data, and Video Connector Pinouts

Details the pinouts for power, data, and video connectors.

Network Connector Pinouts

Details the pinouts for the network connector.

SeaTalkng Connector Pinouts

Details the pinouts for the SeaTalkng connector.

Video In;Out Connector Pinouts

Details the pinouts for the video input/output connector.

Appendix B: NMEA 0183 Sentences

NMEA 0183 Sentences Supported

Lists supported NMEA 0183 sentences for transmit, receive, and bridging.

Appendix C: NMEA Data Bridging

NMEA Data Bridging Explained

Explains how NMEA data bridging allows data repetition between NMEA 2000 and NMEA 0183 devices.

Appendix D: NMEA 2000 Sentences

Supported NMEA 2000 Sentences

Lists supported NMEA 2000 sentences for NMEA 2000, SeaTalkng, and SeaTalk 2 protocols.

Appendix E: Switch Panel Application

Vessel Control and Monitoring Systems

Explains how the display provides monitoring and controls for power circuits and equipment.

Vessel Control and Monitoring System Connection

Details connecting the multifunction display to an EmpirBus NXT system.

Switch Panel Configuration

Explains the need for a configuration file and how to load it.

Switch Panel Overview

Describes monitoring and controlling vessel systems via the switch panel application.

Appendix F: Software Releases

Software Version History and Changes

Details Raymarine's software updates, improvements, and compatibility.

Appendix G: Multifunction Display Compatibility

MFD Software Version Compatibility

Table showing MFD software versions required to support listed Raymarine hardware.

Related product manuals

Raymarine A Series A50

Raymarine Autohelm ST5000

41 pages

Raymarine SmartPilot ST6001

86 pages

Raymarine A series - User Manual

Table of Contents

Other manuals for Raymarine A series

Questions and Answers:

Raymarine A series Specifications

Summary

Chapter 1: Important Information

Certified Installation

Disclaimers

Memory Cards and Chart Cards

EMC Installation Guidelines

RF Exposure

FCC Compliance and Interference Statements

Industry Canada Compliance

Japanese Approvals

Third-Party Software License Agreements

Suppression Ferrites

Connections to Other Equipment

Declaration of Conformity

Product Disposal

Pixel Defect Policy

Warranty Registration

IMO and SOLAS

Technical Accuracy Disclaimer

Chapter 2: Document and Product Information

Handbook Information

Handbook Conventions

Handbook Illustrations Note

Product Overview: Display Variants

System Feature Highlights

Chapter 3: Planning the Installation

System Integration Overview

Installation Checklist

Multiple Data Sources (MDS) Overview

Identifying Your Display Variant

Networking Constraints

Typical Systems Configurations

System Protocols

Data Master Role

Parts Supplied: a6 x and a7 x

Parts Supplied: a9 x and a12 x

Parts Supplied: e7; e7 D

Parts Supplied: c Series and e Series

Tools Required for Installation

Selecting a Location

Chapter 4: Cables and Connections

General Cabling Guidance

Connections Overview

a9 x and a12 x Connections Overview

Power Connection: a6 x and a7 x

Power and Data Connection

Network Connections

Keypad Connection

Radar Connection

Sonar Connection

Thermal Camera Connection

IP Camera Connections

Weather Receiver Connection

Fusion Link Connection

GPS Connection

GA150 Connection

AIS Connection

Fastheading Connection

SeaTalkng Connections

NMEA 2000 Connection

SeaTalk Connection

NMEA 0183 Connection

a6 x and a7 x to NMEA 0183 DSC VHF Radio Connection

Camera; Video Connection

Camera; Video In-Out Connection

Media Player Connection

Bluetooth Remote Control Connection

Wi-Fi Connections

Chapter 5: Mounting

Mounting: a Series Displays

Mounting: c Series and e Series Displays

Chapter 6: Getting Started

Display Power Management

a Series Controls Overview

e7; e7 D Controls Overview