Renesas M16C/29 Series User Manual

puorG92/C61M
22. Usage Notes
page 425
854fo7002,03.raM21.1.veR
2110-1010B90JER
22.3 Protection
Set the PRC2 bit to 1 (write enabled) and then write to any address, and the PRC2 bit will be cleared to 0
(write protected). The registers protected by the PRC2 bit should be changed in the next instruction after
setting the PRC2 bit to 1. Make sure no interrupts or DMA transfers will occur between the instruction in
which the PRC2 bit is set to 1 and the next instruction.

Renesas M16C/29 Series Specifications

General

Brand	Renesas
Model	M16C/29 Series
Category	Microcontrollers
Language	English