Electrical characteristics
M30240 Group
Rev.1.00 Sep 24, 2003 Page 125 of 360
Table 1.38: Recommended operating conditions (Vcc=4.1~5.25V, Vss=0V, Ta= 0°C∼ 70°C, f(Xin) = 12MHz)
Note: The total output current is the sum of all the currents flowing through all the applicable ports. The total average current
is an average value measured over 100 ms. The total peak current is the peak value of all the currents.
Symbol Parameter
Standard
Unit
Min Typ Max
V
cc
Supply voltage 4.1 5.0 5.25 V
AV
cc
Analog supply voltage Vcc V
Vss Supply voltage 0 V
Avss Analog supply voltage 0 V
V
IH
High input voltage
Port0, Port1, Port2, Port3, Port6, Port7,
Port8,Port10,RESET,VREF,XIN,CNVSS
0.8Vcc
Vcc V
V
IL
Low input voltage
Port0, Port1, Port2, Port3, Port6, Port7,
Port8,Port10,RESET,VREF,XIN,CNVSS
0
0.2Vcc
V
Ioh (peak) High peak output current
Port0, Port1, Port3, Port6, P71, P73,
P75, P77, P81 to P87, Port10
-10 mA
P20 to P27, P70, P72, P74, P76, P80 -20 mA
Ioh (avg.) High avg output current
Port0, Port1, Port3, Port6, P71, P73,
P75, P77, P81 to P87, Port10
-5 mA
P20 to P27, P70, P72, P74, P76, P80 -10 mA
ΣIoh(peak) High peak output current
P2, P3, P6, P7, P8
0
~P8
2
-80 mA
P0, P1, P8
3
~P8
7
, P10
-80 mA
ΣIoh (avg.) High avg output current
P2, P3, P6, P7, P8
0
~P8
2
-40 mA
P0, P1, P8
3
~P8
7
, P10
-40 mA
Iol (peak) Low peak output current
Port0, Port1, Port3, Port6, P71, P73,
P75, P77, P81 to P87, Port10
10 mA
P20 to P27, P70, P72, P74, P76, P80 20 mA
Iol (avg.) Low avg output current
Port0, Port1, Port3, Port6, P71, P73,
P75, P77, P81 to P87, Port10
5mA
P20 to P27, P70, P72, P74, P76, P80 10 mA
ΣIol (peak) Low peak output current
P2, P3, P6, P7, P8
0
~P8
2
80 mA
P0, P1, P8
3
~P8
7
, P10
80 mA
ΣIol (avg. Low avg output current
P2, P3, P6, P7, P8
0
~P8
2
40 mA
P0, P1, P8
3
~P8
7
, P10
40 mA
f(X
IN
)
Main clock input oscillation frequency 1 12
MHz