Ricoh Aficio 2022 - Initializing the Hard Disk; Page Setup; Printing the Font Catalog

PostScript 3
32
1
Initializing the Hard Disk
When initializing the machine's hard disk using Printer Utility for Mac, only
fonts related to PostScript will be deleted. Before initializing, make sure you
know the fonts already stored in the machine.
Important
❒ When initializing the machine's hard disk from the machine's control panel,
all the data in the machine, such as the Document Server data, will be deleted.
Before initializing, be sure to check the data on the hard disk.
A
AA
A
On the [File] menu, click [Initialize Printer's Disk...].
A confirmation message appears.
Note
❒ To cancel initialization, click [Cancel].
B
BB
B
Click [Execute].
Initializing starts.
Important
❒ Do not turn off the main power switch until initialization finishes, other-
wise it might damage the hard disk.
C
CC
C
When the completion message appears, click [OK].
Page Setup
You can set the paper size in [Print Fonts Catalogue] and [Print Fonts Sample].
A
AA
A
On the [File] menu, click [Page Setup].
B
BB
B
Select the paper size.
Printing the Font Catalog
You can print the names of fonts available on the machine.
Limitation
❒ If you use Mac OS X, this function is not possible.
Note
❒ The paper selected under [Page Setup] is used.
A
AA
A
On the [File] menu, click [Print Fonts Catalogue].
B
BB
B
Click [Print].