5
1. Getting Started
Control Panel
1.
Indicators
Displays errors and machine status.
L: Service call indicator
x: Misfeed indicator
M: Open Cover indicator
d: Add Staple indicator
D: Add Toner indicator
B: Load Paper indicator
See "Control Panel", General Settings
Guide.
2.
{
{{
{User Tools/Counter}
}}
} key
• User Tools
Press to change default settings and
conditions to your requirements.
• Counter
Press to display or print the total
number of copies made.
3.
Display panel
Displays operation status, error messag-
es, and function menus. See p.7 “Display
Panel” .
4.
{
{{
{Energy Saver}
}}
} key
Press to switch to and from Energy Saver
mode.
Note
❒ This key is ineffective during System
Settings (User Tools) operations.
5.
Main power indicator
This indicator lights when the main pow-
er switch is turned on.
Important
❒ Do not turn off the main power
switch while the Power indicator is
lit or blinking. Doing so may dam-
age the hard disk.
6.
Power indicator
This indicator lights when the operation
switch is turned on.
7.
Operation switch
Press this switch to turn the power on
(the Power indicator goes on). To turn the
power off, press this switch again (the
Power indicator goes off).
8. {
{{
{Clear/Stop}
}}
} key
Press to cancel the entered data.
12
13
ZKQH030E
RussianC3-GB-Pref1-F1_FM.book Page 5 Friday, June 13, 2003 2:16 PM
To Next Page
Loading...
