User Tools Menu (System Settings)
31
3
Network Configuration
Any change you make with User
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the {
{{
{Energy
Saver}
}}
} or {
{{
{Clear Modes}
}}
} key is pressed.
Configuring the network using the
control panel
Note
❒ Operations for System Settings are
different from normal operations.
After using User Tools, press the
{
{{
{User Tools/Counter}
}}
} key to exit.
❒ If the [Key Operator Code] has been
set, the key operator code entry
screen appears. Enter the code, and
then press [OK]. See General Set-
tings Guide.
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
Note
❒ The machine will be offline dur-
ing setting.
B
BB
B
Press [System Settings].
C
CC
C
Press [Interface Settings] or [File
Transfer].
D
DD
D
Select the required menu, and
then press the desired key.
E
EE
E
Change settings by following the
instructions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to the System
Settings menu, press [Cancel].
F
FF
F
Press [Exit].
G
GG
G
Press the {
{{
{User Tools/Counter}
}}
} key.
Note
❒ You can also exit by pressing
[Exit] on the User Tools main
menu.
ZFFH220E
To Next Page
Loading...
