Reception Features
92
5
❒ If an error is encountered during e-mail reception, reception is aborted, the e-
mail is discarded, and Error Report is printed. Also, the SMTP server sends
an error notification to the originator.
❒ This machine will respond to the SMTP server with a “busy” signal when the
SMTP server attempts to route received documents to this machine while it is
transmitting an e-mail. Then, the SMTP server usually tries resending the
documents until the set timeout.
Reference
p.59 “Auto E-mail Reception”, Facsimile Reference <Basic Features>
p.59 “Manual E-mail Reception”, Facsimile Reference <Basic Features>
p.92 “Routing E-mail Received via SMTP”
Routing E-mail Received via SMTP
E-mail received via SMTP can be routed to other fax machines. It can also be
routed to destinations programmed as Quick Dial entries or Groups.
Preparation
Before routing e-mail received via SMTP, you first must set “SMTP RX File
Delivery Settings” to “On”. See p.145 “E-mail Settings”.
Note
❒ If an e-mail transfer request is received when the “SMTP RX File Delivery Set-
tings” to “Off”, this machine responds with an error message to the SMTP
server.
ZLBX080E
RussianC3Fax-combine-AE_F_FM.book Page 92 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
