Priority Transmission
7
1
Priority Transmission
Documents you send with Memory
Transmission are sent in the order
they are scanned. Therefore, if several
messages are queued in memory, the
next document will not be sent imme-
diately. However, by using this func-
tion you can have your message sent
before other queued messages.
Limitation
❒ This function is not available with
Immediate Transmission. If this
function is selected, the machine
automatically switches to Memory
Transmission.
Note
❒ If there is already a message stored
with this function or a transmis-
sion in progress, your message will
be sent after that message has been
transmitted.
A
AA
A
Place the original, and then select
the scan settings you require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.30 “Scan Settings”, Facsimile
Reference <Basic Features>
B
BB
B
Press [Transmission Mode].
C
CC
C
Press [Priority TX], and then press
[OK].
The standby display appears.
Note
❒ To check the settings, press
[Transmission Mode].
D
DD
D
Specify the destination, and then
press the {
{{
{Start}
}}
} key.
Note
❒ Press [Change/Stop TX File] to
cancel the transmission. See
p.19 “Canceling a Transmis-
sion”
RussianC3Fax-combine-AE_F_FM.book Page 7 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
