Other Transmission Features
82
4
Note
❒ This report is only printed if the
Transmission Result Report is
turned off and a message could not
be successfully transmitted with
Memory Transmission.
❒ You can select whether to include
part of the original image on the re-
port. See p.158 “User Parameters”
(switch 04, bit 7).
❒ The Page column gives the total
number of pages. The Not Sent col-
umn gives the number of pages
that could not be sent successfully.
❒ Unprogrammed destination col-
umn indicates the message could
not be sent because the transfer's
fax number is incorrect, or not pro-
grammed.
❒ -- column indicates the Internet
Fax document was sent to the mail
server programmed in this ma-
chine. (However, this does not
mean the e-mail was delivered.)
Transmission Result Report
(Immediate Transmission)
If you turn this report on, a report will
be printed after every Immediate
Transmission so you have a record of
whether the transmission was suc-
cessful or not. If the machine is set up
not to print this report and the fax
message could not be successfully
transmitted, the Error Report is print-
ed instead. If “E-mail TX Results” is
programmed in a Quick Operation
key, you can select whether a report
e-mail is sent after transmission.
Note
❒ You can switch this report on or off
in the User Parameters. See p.158
“User Parameters” (switch 03, bit
5).
❒ To view the report without text
Disruption, select a font of even
character width in your e-mail ap-
plication's settings.
❒ If the page was sent successfully,
the Page column gives the total
number of pages sent successfully.
RussianC3Fax-combine-AE_F_FM.book Page 82 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
