Control Panel
9
1
10. Indicators
Display errors and the machine status.
d: Add Staple indicator
D: Add Toner indicator
B: Add Paper indicator
L: Service Call indicator
M: Open Cover indicator
x: Misfeed indicator
Reference
For more information, see General
Settings Guide.
11. Function status indicators
• When lit green, the corresponding
function is active.
• When lit red, the corresponding func-
tion is interrupted. Press the respec-
tive key, and then follow the
instructions that appear on the screen.
12. Function keys
Press the {
{{
{Copy}
}}
}, {
{{
{Document Server}
}}
}, {
{{
{Fac-
simile}
}}
}, {
{{
{Printer}
}}
}, or {
{{
{Scanner}
}}
} key to acti-
vate the respective function. The display
content changes accordingly.
The indicator for the selected function
lights up.
13. Number keys
Use to enter numeric values.
14.
{
{{
{#}
}}
} key (Enter key)
Use to enter a numeric value.
15.
{
{{
{Clear/Stop}
}}
} key
• Clear: Clears an entered numeric val-
ue
• Stop: Stops scanning
16. {
{{
{Start}
}}
} key
Use to begin scanning, file storing, or de-
livery.
Display Contents
This section explains the normal screen configuration.
The display's contents differ depending on the function.
Note
❒ The Copy screen is set as the default screen when the machine is turned on.
You can change this setting in the System Settings. See General Settings Guide.
Using e-mail
Press the {
{{
{Scanner}
}}
} key to display the e-mail screen (when [E-mail/ Folder] has
been selected in [Destination List Display Priority 1] and [E-mail Address] has been se-
lected in [Destination List Display Priority 2]). If the Network TWAIN Scanner screen
appears, press [Exit].
Reference
For information about Destination List Display Priority, see p.18 “Destination
List Settings”.
To Next Page
Loading...
