Combined Function Operations
26
2
❒ The copying screen is displayed as default after power on. You can change
this default setting. See p.49 “Function Priority”.
-
--
-System Reset
The machine returns automatically to its initial condition when the job is fin-
ished, after a certain period of time has elapsed. This function is called "System
Reset".
Note
❒ You can change the System Reset time. See p.56 “System Auto Reset Timer”.
ZLFS350A
RussianC3_AEgsg-F_FM.book Page 26 Monday, June 16, 2003 6:35 PM
To Next Page
Loading...
