Checking and Canceling Transmission Files
24
2
Resending a File
Machine memory stores messages
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
messages.
Preparation
You should select “Store for 24
hours” for “Store a message that
could not be transmitted” in User
Parameters. See p.158 “User Pa-
rameters” (switch 24, bit 0).
Note
❒ Files that could not be transmitted
will be kept for either 24 or 72
hours depending on how you pro-
gram this function. See p.158 “User
Parameters” (switch 24, bit 1).
A
AA
A
Press [Change/Stop TX File].
B
BB
B
Press [Transmit Failed File].
C
CC
C
Select the file you want to resend.
“TX failed” is displayed for files
that could not be sent.
Note
❒ If multiple destinations were
specified, only the destination
number appears.
❒ If multiple destinations were
specified, only the number of
unsent messages appears.
D
DD
D
Press [OK].
Note
❒ To add destinations, press
[Add], and then specify the des-
tinations.
❒ To cancel transmissions, press
[Cancel]. The display returns to
that of step
C
.
❒ Repeat from step
C
to resend
another file.
E
EE
E
Press [Exit].
The standby display appears.
Transmission starts.
RussianC3Fax-combine-AE_F_FM.book Page 24 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
