Reception Features
84
5
• Reverse Order Printing
See p.99 “Reverse Order Printing”.
• 2-sided Printing
See p.96 “Two-Sided Printing”.
Important
❒ When about one hour passes after
power of the machine is turned off,
all fax messages stored in memory
will be lost. If any messages have
been lost for this reason, a Power
Failure Report is automatically
printed when the operation switch
is turned on. Use this report to
identify lost messages.
❒ The machine may not be able to re-
ceive large numbers of messages
or messages with high data con-
tent. In such cases, we recommend
you switch off the above functions
or install the optional expansion
memory.
Limitation
❒ The machine may not be able to re-
ceive fax messages when free
memory space is low.
Note
❒ If the free memory space reaches
0% during Memory Reception, the
machine can no longer receive the
current fax message and stops
communicating.
❒ If you have selected Store for Re-
ception File Setting, received mes-
sages will be saved on the hard
disk and will not be printed. You
can print those messages by oper-
ating the machine or a connected
computer, as necessary. See p.185
“Storing or Printing Received Doc-
uments”.
Substitute Reception
In Substitute Reception, a received fax message is stored in memory instead of
being printed. Substitute Reception gets used when the machine cannot print
any fax messages. Fax messages received using Substitute Reception are auto-
matically printed when the condition which caused the machine to use Substi-
tute Reception is rectified.
Depending on why the machine cannot print, Substitute Reception might be
used for all fax messages received, or for only those messages that match a spec-
ified condition.
The Receive File indicator lights to let you know when fax messages have been
received using Substitute Reception.
ZLBS030N
RussianC3Fax-combine-AE_F_FM.book Page 84 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
