Ricoh Aficio 2022 - Auto Fax Reception Power-Up; JBIG Reception

Reception Features
94
5
JBIG Reception
The optional fax function upgrade unit is
required.
If you use JBIG (Joint Bi-level Image
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion. You can only use this function
with G3 line type. It allows you to re-
ceive messages sent in the JBIG for-
mat through JBIG Transmission.
Limitation
❒ If ECM is turned off, JBIG Recep-
tion is unavailable. See p.158
“ECM”.
Note
❒ When the optional extra G3 inter-
face unit is installed, JBIG recep-
tions of G3-2 line is as standard.
Auto Fax Reception Power-up
This machine can be set to shut down
automatically if no one has used it for
a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the main power
switch is on.
Important
❒ Reception is not possible if both
the operation switch and main
power switch are turned off.
Note
❒ You can set whether messages are
printed as soon as they are re-
ceived (Immediate Reception)
with the User Parameters. See
p.158 “User Parameters” (switch
14, bit 0).
❒ You can also have fax messages re-
ceived by Memory Reception
(Substitute Reception) printed af-
ter the machine is turned on.
RussianC3Fax-combine-AE_F_FM.book Page 94 Monday, July 14, 2003 2:36 PM