Original Orientation and Scan Area
39
3
Orientation selection
A Press the key for the same ori-
entation as the actual orienta-
tion of the original, or .
Reference
p.33 “Specifying original ori-
entation and setting origi-
nals”
C
CC
C
Press [OK].
Note
❒ The current settings are dis-
played.
For a Network TWAIN Scanner
A
AA
A
Open the Scanner Properties dia-
log box.
Reference
p.94 “Scanning Originals”
B
BB
B
Select the position from the [Docu-
ment:] list in the [Document] area.
C
CC
C
Select [ / ] or [ / ] from
the [Orientation:] list.
Reference
p.33 “Specifying original orien-
tation and setting originals”
D
DD
D
When the originals are placed in
the ADF, select [Simplex] or [Du-
plex] in the [Side:] list.
Note
❒ If originals of different sizes are
placed in the ADF, specify the
document size or detection
method in the [Size:] box. If [Au-
to detection (Uni-size)] is selected,
all originals are scanned using
the size of the first page. If [Auto
detection (Multi-size)] is selected,
all originals are scanned accord-
ing to their own width. For both
Uni-size and Multi-size, all orig-
inals are scanned using their
own length.
Scanning Originals in Several
Times
Multiple originals can be scanned as a
single file by dividing them and scan-
ning them using the exposure glass or
the ADF. When scanning originals di-
viding in several times, there are two
waiting status for setting additional
originals: the machine waits for a des-
ignated time, or keeps waiting until
an additional original is set.
Specifying a time limit for additional
originals
In advance, specify the waiting time
in seconds for placing the additional
originals.
• Scanning using the exposure glass
Select [Set Wait Time] for [Wait Time
for Next Orig.: Exposure Glass].
• Scanning using the ADF
Select [Set Wait Time] for [Wait Time
for Next Original(s): SADF].
Reference
p.15 “Wait Time for Next Orig.: Ex-
posure Glass” or “Wait Time for
Next Original(s): SADF”
To Next Page
Loading...
