Preparations for Use as a Network Scanner
18
2
The range of possible original sizes
and scan sizes is as follows:
• Original Size
X1: 140 - 432 mm (5.5” - 17.0”)
Y1: 140 - 297 mm (5.5” - 11.7”)
• Scan Size
X3: 10 - 432 mm (0.4” - 17.0”)
Y3: 10 - 297 mm (0.4” - 11.7”)
Keep the scan area settings within
these range.
E
EE
E
When all dimensions are entered,
press [OK].
F
FF
F
Make sure that the area specified
in step
D
DD
D
(X3 and Y3) is shown in
the [Custom size] field, and then
press [OK].
G
GG
G
Press [Exit].
The main menu reappears.
Destination List Settings
This section explains how to set the
defaults for the destination list and ti-
tles displayed.
The destination list settings consist of
the following. For the list about set-
tings and defaults, see p.11 “Scanner
Features”.
❖
❖❖
❖ Destination List Display Priority 1
Select a destination list to be dis-
played when the machine is in the
initial state. You can select either
[E-mail/ Folder] or [Delivery Server].
❖
❖❖
❖ Destination List Display Priority 2
This function is available when [E-
mail/ Folder] is selected for [Destina-
tion List Display Priority 1].
Select a destination list of the ma-
chine to be displayed when the
machine is in the initial state.
You can select either [E-mail Ad-
dress] or [Folder].
❖
❖❖
❖ Select Title
Select what titles are displayed on
the screen. Selecting a title on the
screen will display the destina-
tions programed for that title. This
allows for easy selection of desti-
nations including e-mail destina-
tions and Scan to Folder
destinations. Select either [Title 1]
(ten titles), [Title 2] (ten titles), or [Ti-
tle 3] (five titles).
❖
❖❖
❖ Update Delivery Server Destination
List
To update the Delivery Server Des-
tination List, press [Update Delivery
Server Destination List].
Ordinarily, the Delivery Server
Destination List is automatically
updated. This function allows up-
dating at any time.
To Next Page
Loading...
