Checking the Transmission Result (TX File Status)
31
3
Checking the Transmission Result (TX File
Status)
You can browse a part of the Trans-
mission Result Report on the display.
Note
❒ Only the transmission result of the
last 200 communications (recep-
tions & transmissions) are shown.
❒ If a transmission is completed
while you are using this function,
the result will not appear. To view
the latest result, exit TX File Status,
and then try again.
❒ You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps A and B.
A
AA
A
Press [Information].
B
BB
B
Press [TX File Status].
C
CC
C
Check the transmission results.
Transmission results are dis-
played, from the latest result
down, in groups of six.
Note
❒ When a fax is sent, “Destina-
tion” shows the Own Fax
Number or Fax Header infor-
mation of a receiver. The e-mail
address and name programmed
in the destination list appears in
the “To” field of the sent Inter-
net Fax document. For a trans-
mission from a computer, “--
LAN-Fax -->” is shown.
D
DD
D
Press [Exit] twice.
The standby display appears.
RussianC3Fax-combine-AE_F_FM.book Page 31 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
