Ricoh Aficio 2022 - Job Preset; Left Original Beeper

Basic Procedure
19
2
Left Original Beeper
The beeper sounds and an error mes-
sage appears if you leave originals on
the exposure glass after copying.
Note
❒ See p.93 “Tone: Original remains”.
Job Preset
You can make settings for the next
copy job while copying is in progress.
If a long copy job is in progress and
you do not want to wait for it to finish,
you can use this function to make set-
tings for the next copy job in advance.
When the current copy job finishes, the
next job starts automatically.
A
AA
A
Press [Next Job] when "
Copying
"
appears.
B
BB
B
Make settings for the next copy
job.
C
CC
C
Place the originals in the ADF,
and then press the {
{{
{Start}
}}
} key.
All originals are scanned.
D
DD
D
Press [To "Printing"].
The initial copy display appears.
Following the current copy job, the
next job starts automatically.
Note
❒ You can switch the display to
the current copy job by pressing
[To "Printing"]. You can switch
the display to the preset job by
pressing [To "Reserving"].
RuC3_GBcopy-F_FM.book Page 19 Wednesday, June 25, 2003 9:39 AM