Ricoh Aficio 2022 - Page 1089

Using the Installation Shell Script
7
1
C
CC
C
Run the installation shell script.
# sh ./install
Note
❒ Insert a period and slash before the current directory.
D
DD
D
Enter a number to select the workstation operating system you are using.
Network printer install shell
Copyright RICOH CO.,LTD. 1994-2002
Select your workstation OS type
1.SunOS 4.x.x
2.Solaris 2.x, Solaris 7-8 (SunOS5.x)
3.HP-UX
4.UnixWare
5.Linux
6.OpenServer
7.Quit
Enter <1-7>:
2
Note
❒ SunOS, UnixWare, and OpenServer appear on the screen, but they are not
supported. Use Solaris, HP-UX, or Linux.
❒ If you select “7”, the installation shell script ends.
E
EE
E
Enter the printer's IP address.
Enter Printer host IP address <xxx.xxx.xxx.xxx> [re-
turn=skip]:
192.168.15.16
Note
❒ The IP address will be added to the /etc/hosts file.
❒ If the host name of the printer has already been configured, press the {
{{
{RE-
TURN}
}}
} ({
{{
{ENTER}
}}
}) key. Nothing will be added to the /etc/hosts file.
F
FF
F
Enter the printer's host name.
Enter Printer host name : nphost
Note
❒ The host name will be added to the /etc/hosts file.
❒ If no IP address was entered in step
E
, nothing is added to the /etc/hosts
file.