Copying from the Bypass Tray
25
2
D Enter the horizontal size of the
paper using the number keys,
and then press [#].
Note
❒ If [Horiz mm] is not highlight-
ed, press [Horiz mm].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
E Press [OK].
When copying onto special paper
A Press the {
{{
{#}
}}
} key.
B Select the paper type in Special
paper.
C Press [OK].
F
FF
F
Place originals, and then press the
{
{{
{Start}
}}
} key.
Note
❒ When copying onto OHP trans-
parencies, remove copies one by
one.
❒ When setting OHP transparen-
cies, thin paper, or adhesive la-
bel paper, Staple, Shift, or Sort
functions cannot be used.
G
GG
G
When your copy job is finished,
press the {
{{
{Clear Modes}
}}
} key to
clear the settings.
RuC3_GBcopy-F_FM.book Page 25 Wednesday, June 25, 2003 9:39 AM
To Next Page
Loading...
