Confidential Transmission
9
1
D
DD
D
Depending on the Confidential
Transmission type, use one of the
following procedures:
Default ID
A Check that [Default ID] has been
selected, and then press [OK].
“Default ID” is shown above
the highlighted [Confidential TX].
Note
❒
To cancel Confidential Trans-
mission, press
[Cancel]
. The
display returns to that of step
C
.
Override ID
A Select [ID Override].
B Enter the Confidential ID (4-
digit number) using the
number keys, and then press
[OK].
“ID Override” and the entered
Confidential ID are shown
above the highlighted [Confiden-
tial TX].
Note
❒ If you make a mistake, press
[Clear] or the {
{{
{Clear/Stop}
}}
} key
before pressing [OK], and
then try again.
❒
To cancel Confidential Trans-
mission, press
[Cancel]
. The
display returns to that of step
C
.
E
EE
E
Press [OK].
The standby display appears.
Note
❒ To check the settings, press
[Transmission Mode].
F
FF
F
Dial, and then press the {
{{
{Start}
}}
}
key.
Note
❒ You can cancel the transmission
setup for Confidential Trans-
mission. See p.19 “Canceling a
Transmission”.
RussianC3Fax-combine-AE_F_FM.book Page 9 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
