Key Operator Setting
148
9
Box Setting By using SUB and SEP Codes
with these functions, you can
send messages to another par-
ty's box, and retrieve messag-
es stored in boxes.
p.172 “Box Settings”
Transfer Report Before using Transfer Re-
quest, you need this Transfer
Report setting.
p.182 “Transfer Report”
Program Confidential ID Programs an ID required for
Confidential communication.
p.183 “Programming a Confi-
dential ID”
Program Polling ID Programs an ID required for
Polling communication.
p.183 “Programming a Polling
ID”
Program Memory Lock ID Programs an ID required for
Memory Lock reception.
p.184 “Programming a Memo-
ry Lock ID”
Select Dial/Push Phone Selects a line type when you
connect the machine to a G3
analog line.
Note
❒ This function is not availa-
ble in some areas.
p.185 “Selecting Dial/Push
Phone”
Reception File Setting Selects whether received doc-
uments are saved on the hard
disk to be printed later or
printed immediately without
being saved.
p.185 “Storing or Printing Re-
ceived Documents”
Stored RX File User Code Set-
ting
Set the password to view re-
ceived and stored documents
using a Web browser or Desk-
TopBinder V2 Lite.
p.187 “Setting a User Code for
Viewing Received and Stored
Documents”
Function name Description Reference
RussianC3Fax-combine-AE_F_FM.book Page 148 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
