Printer Features Parameters
47
5
❖
❖❖
❖ Copies
You can specify the number of
print sets. This setting is disabled if
the number of pages to print has
been specified with the printer
driver or another command.
• 1 to 999 by 1
Note
❒ Default: 1
❖
❖❖
❖ Edge Smoothing
Set this to enable Edge Smoothing.
• On
• Off
Note
❒ Default: On
❒ If Toner Saving is set to On,
Edge Smoothing is ignored
even if it is set to On.
❖
❖❖
❖ Toner Saving
Set this to enable Toner Saving.
• On
• Off
Note
❒ Default: Off
❖
❖❖
❖ Printer Language
Normally, the machine should be
set to Auto. If the printer language
cannot be detected in Auto, the
language specified by Default
Printer Language is selected.
• Auto
• PCL
• PS
Note
❒ Default: Auto
❒ PS appears only when the op-
tional PostScript 3 board is in-
stalled.
❖
❖❖
❖ Sub Paper Size
You can enable the Auto Substitute
Paper Size (A4↔LT) feature.
• Auto
• Off
Note
❒ Default: Off
❖
❖❖
❖ Page Size
You can select the default paper
size.
• 11 × 17
• 8
1
/
2
× 14
• 8
1
/
2
× 11
• 5
1
/
2
× 8
1
/
2
• 7
1
/
4
×10
1
/
2
• 8×13
• 8
1
/
2
×13
• 8
1
/
4
×13
• A3
• B4 JIS
• A4
• B5 JIS
• A5
• A6
• 8K
• 16K
• Custom Size
Note
❒ Default:
• Metric version: A4
• Inch version: 8/ × 11
To Next Page
Loading...
