Ricoh Aficio 2022 - Page 826

Sending Scan File by Scan to Folder
60
5
C Press [E-mail].
D Press [Exit].
The E-mail screen appears.
E Press [].
The Scan to Folder screen ap-
pears.
F
FF
F
Specify the destination folder.
To specify the destination folder,
you can select it from the list, select
it by specifying a registration
number, enter the path for the
folder of the client computers on
the same network directly, specify
the folder in the FTP server, or se-
lect the destination from the client
computers on the same network.
When selecting a destination
folder from the list
A Press the title for the destina-
tion folder. The destination
folders for that title are dis-
played.
If the folder is not displayed,
press [U
UU
U] or [T
TT
T] to display the
other folders.
B Select the destination folder to
which the scan file is to be sent.
The selected folder is highlight-
ed and also is displayed in the
destination field at the top of the
screen.
Note
❒ If a protection code has been
set for the folder, a screen for
entering the protection code
appears.
C To select more destination
folders, repeat step B
BB
B.
Note
❒ To deselect a destination,
press the destination once
more, or press [U
UU
U Prev.] or [T
TT
T
Next] to display the destina-
tion in the destination field,
and then press the
{
{{
{Clear/Stop}
}}
} key.
Using a registration number to
select a destination folder
A Press [Registration No.].
B Use the number keys to enter
the five-digit registration
number that has been assigned
to a destination folder.
If the entered number is less
than five digits long, press the
{
{{
{#}
}}
} key after the last number.
Example: To enter 00003