Ricoh Aficio 2022 - Page 833

Sending Scan File by Scan to Folder
67
5
Searching to select a sender
A Press [Attach Sender's Name].
B Press [].
C Press [User (Dest.) Name].
The soft keyboard is displayed
for entering a sender name.
D Enter part of the sender name.
Note
❒ Enter the first character or
characters of the sender
name.
❒ It is necessary to differentiate
between capital and small
letters.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
E Press [OK].
F Select the sender.
Note
❒ When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
G Press [Exit].
H Press [OK].
J
JJ
J
Press the {
{{
{Start}
}}
} key.
Note
❒ To interrupt scanning, press the
{
{{
{Clear/Stop}
}}
} key or press [Stop]
on the screen.
❒ When using the Batch function
or the SADF function, place the
next original after the others
have been scanned. See p.39
“Scanning Originals in Several
Times”.
❒ A file beyond 2000 MB cannot
be sent.