Troubleshooting
105
9
Exceeded max. number of files which
can be sent at the same time. Reduce
the number of the selected files.
The number of files exceeded the
maximum number possible. Reduce
the number of files and send them
again.
Exceeded max. number of files which
can be used in Document Server at the
same time.
Make sure the files stored by the oth-
er functions, and then delete un-
needed files.
Exceeded max. number of pages per
file. Do you want to store the scanned
pages as 1 file?
The maximum number of pages per
file is 1000. Specify whether to use
the data or not. Scan the pages that
were not scanned and store them as
a new file.
Exceeded max. number of standby files.
Try again after the current file is
sent.
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery function. Wait
until files have been sent.
Exceeded max. number of stored files.
Cannot send the scanned data as cap-
turing files is unavailable.
The maximum number of files that
can be stored in Document Server is
3000. Reduce the number of files or
delete unneeded files.
Exceeded max. page capacity per file.
Press [Send] to send the scanned data,
or press [Cancel] to delete.
Because the number of pages has
reached the maximum number that
can be sent, the data up to this point
is sent. Scan the remaining pages af-
ter transmission.
Exceeded time limit for LDAP server
search. Check the server status.
A network error has occurred and
connection has failed. Try the opera-
tion once more. If the message is still
shown, the network may be crowd-
ed.
Check the information of System Set-
tings.
LDAP server authentication has
failed. Check the settings.
Make settings correctly for the user
name and the password for LDAP
server authentication.
Load paper of the following sizes.Re-
quired: A3L B4 JISL A4K A4L
Load paper of the sizes listed in the
message.
Memory is full. Cannot scan. The
scanned data will be deleted.
Because of insufficient hard disk
space, the first page could not be
scanned. Try one of the following
measures:
• Wait for a while, and then retry
the scan operation.
• Reduce the scan area or scanning
resolution.
• Delete unneeded stored files.
Message Causes and solutions
To Next Page
Loading...
