Ricoh Aficio 2022 - Page 951

Printing with NetWare
63
5
NetWare 4.x, 5/5.1, 6
Important
❒ You must set up the print server
using NDS mode in NetWare 4.x,
5/5.1, 6.
❖
❖❖
❖ To use NetWare 5/5.1, 6
• Use the printer as a print server.
Do not use it as a remote printer
in a PureIP environment.
• If you use PureIP, configure the
machine to use TCP/IP. For
more information about how to
make the settings, see p.17 “Set-
ting Up the Machine on a Net-
work”.
A
AA
A
Log on to the file server as an ad-
ministrator, or equivalent.
B
BB
B
Start SmartNetMonitor for Ad-
min.
C
CC
C
On the [Group] menu, point to
[Search Device], and then click
[IPX/SPX] or [TCP/IP].
A list of machines appears.
D
DD
D
In the list, select the printer for
which you want to change config-
uration.
E
EE
E
On the [Tools(T)] menu, click [NIB
Setup Tool].
NIB Setup Tool starts.
Reference
If you use NetWare 5/5.1 or
NetWare 6.0 in a PureIP envi-
ronment, see p.64 “Using
PureIP in the NetWare 5/5.1, 6
environment”.
F
FF
F
Click [Wizard], and then click [OK].
The [NIB Setup Tool - Network
board list] dialog box of the net-
work interface board appears.
G
GG
G
If necessary, enter the print server
name in the [Device Name(N):] box,
and then click [Next(N) >].
H
HH
H
Select the [NetWare] check box,
and then click [Next(N) >].
I
II
I
Click [NDS Mode(D):], enter the file
server name in the [File Server
Name(F):] box, the NDS tree name
in the [NDS Tree(T):] box and the
context in the [NDS Context(C):]
box, and then click [Next(N) >].
• In the [File Server Name(F):] box,
enter the file server name (up to
47 alphanumeric characters) of
the server to make the print
server. You can also click
[Browse(B)…] to select a file serv-
er in the [Browse(B)…] dialog
box.
• In the [NDS Tree(T):] box, enter
the NDS tree name (using up to
32 alphanumeric characters("-"
and "_" can be used)) of the NDS
tree in which you want to make
the print server. [Browse(D)…] to
select an NDS tree from those
listed in the [Browse(D)…] dialog
box.
• In the [NDS Context(C):] box, en-
ter the NDS context in which to
make the print server. As con-
text, object names are entered in
lower object order and divided
by a period. For example, if you
want to create a print server in
NET under DS, enter "NET.DS".