SP Tables
J007/J010/J011 5-16 SM
MID area of transparencies for printing. The MID area is shown below.
[5 to 255/0/1/mm]
1236 CHG:AREA2:F
Set Charge of Area 2 for MID: Simplex: Any Other Than
OHP
Use this SP to set the size of the MID on the 1st side of any paper except
transparencies (OHP).
Do this setting when you want to adjust pitch amount of the charge applied to the
MID area on the 2nd side of any paper other than transparencies. The MID area
is shown below.
[5 to 255/0/1/mm]
1237 CHG:AREA2:B
Set Charge of Area 2 for LE/TE: Duplex: Any Other Than
OHP
Use this SP to set the size of the MID on the 2nd side of any paper except
transparencies (OHP) for duplex printing. Do this setting when you want to adjust
pitch amount of the charge applied to the MID area on the 2nd side of any paper
other than transparencies for duplex printing. The MID area is shown below.
[5 to 255/0/1/mm]
To Next Page
Loading...
