Bit Switches
J007/J010/J011 5-40 SM
Setting
Bit Function
0 1
Default Details
before the ink tanks are filled.
OFF: Check is not done.
ON: Check is done
If an abnormal condition is
detected, this triggers SC986
and the printer will not operate
(the tanks are not filled).
1
Self-Diagnostics
Execute
OFF ON 0 This switch sets whether the
self-diagnostic test executes
automatically if the humidity
sensor connection is broken.
OFF: No self-diagnostics
ON: Self-diagnostics execute
2 Double-Count OFF ON 0 Not used for J007/J010, J011
3 Carriage Setting 2 OFF ON 0 Not used for J007/J010, J011
4
Charge Setting OFF ON 0 Shows the flag to indicate
updated version allows charge
adjustment on the transport
belt:
0: Default
1: NVRAM update succeeded,
charge can be adjusted.
5
ICB Miscount
Recovery
OFF ON 0 Japan Only
Determines whether ink
collection tank count in
NVRAM is corrected or not.
0: Count not corrected
1: Count corrected.
6
USB Serial Signal 0 1 0 Determines how the USB
signal is fixed.
0: Serial signal is set with the
value in NVRAM.
1: USB serial signal fixed at
"0" (value in NVRAM is not
changed).
7
Hidden Functions 0 1 0 Determines whether hidden
functions (hidden paper sizes
A5 SEF, B6 SEF) are
displayed.
0: No A5 SEF, B6 SEF display
1: A5 SEF, B6 SEF displayed
Rev. 09/2008
To Next Page
Loading...
