Ricoh J001 - Page 83

MAINTENANCE UNIT
SM 3-11 J001/J003
Replacement
Adjustment
4. Remove the ink supply unit [A]
( x 1,  x 1).
5. Use a plus (+) screwdriver to turn the
screw at [A] counter-clockwise until
the tip of the upper triangle [B] gets
aligned with the tip of the lower
triangle [C].
This unlocks the carriage.
6. Push the unlocked carriage to the
middle of the platen above the
transport belt.
G707R913.BMP
G707R914.BMP
[A]
[A]
[B]
[C]
Unlock
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA