Service Call Conditions
M047 2-8 SM Appendix
Code Description Required Action
854
Wireless LAN Error: Card Error
2
Wireless LAN card has been removed
855
Wireless LAN Error: Card Error
3
Wireless LAN card defective
Wireless card connection not tight
856 Wireless LAN Error 4: Board
Wireless LAN card board defective
PCI connector loose
857 USB I/F Error
The USB driver can generate three types
of errors: RX, CRC, and STALL errors.
Only the STALL error can generate this
SC code.
Defective controller board
858 HDD Encryption unit error 1
A serious error occurs when data is encrypted
to update an encryption key with the HDD
encryption unit. [Number] shows a suffix
number of SC code.
[0], [1], [30]: Replace the controller board.
[2]: Replace the NVRAM.
859 HDD Encryption unit error 2
A serious error occurs when the HDD data is
encrypted to update an encryption key with the
HDD encryption unit. [Number] shows a suffix
number of SC code.
[8]: Install the HDD correctly or initialize
the HDD.
[9]: Initialize the HDD.
[10]: Replace the HDD or replace the
controller board.
860 HDD start-up error
Turn off the machine and turn it back on.
Examine the connection between the
HDD and the controller.
Replace the HDD if the error is frequent.
To Next Page
Loading...
