Ricoh M047 - Page 174

SP Tables
M047 3-12 SM Appendix
1003 10 Duplex
1104
Fusing control
0: Normal, 1: Phase control
Use phase control if the room lights flicker when the fusing lamp starts.
Defaults: North America – Normal (On/off control), Europe – Phase
1105
Fusing Temp.
Adjusts the fusing temperatures for printing and standby mode.
1105 1
Plain
[150 to 200 / 170 / 5 deg.] DFU
Adjusts the fusing temperature for printing on normal paper.
1105 2
Thick2
[150 to 195 / 185 / 5 deg.] DFU
Adjusts the fusing temperature for printing on thick 2 paper.
1105 3
Standby Temp
[140 to 175 / 168 / 1 deg.] DFU
Adjusts the fusing temperature for standby mode.
1106
Fusing Temp Disp
1106 1 Displays the current fusing temperature.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA