SP Tables
SM Appendix 3-27 M047
Appendix: SP
Mode Tables
004
Attack Max Num
[50 to 200 / 200 / 1]
Sets a limit on the number of requests received for certification in order to
slow down the certification speed when an excessive number of access
attempts have been detected.
5420
User Authentication
These settings should be done with the System Administrator.
These functions are enabled only after the user access feature has
been enabled.
041 Printer
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the printer application.
051 SDK1
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the SDK application.
061 SDK2
071 SDK3
5481
Auth. Error Code
This SP code determines how the authentication failures are displayed.
001 System Log Disp
[0 or 1 / 0 / -]
0: OFF [Default], 1: ON
Determines whether an error code appears in the
system log after a user authentication failure occurs.
To Next Page
