SP Tables
SM Appendix 3-29 M047
Appendix: SP
Mode Tables
[0: OFF/1: ON]
5507 009 Cartridge Alarm
When switched on this function informs the
@Remote supply center that the toner
cartridge is almost empty (near-end).
[0: OFF/1: ON]
5507 080 Toner Call Timing
Selects the timing of the toner supply call for
@Remote.
[0: At Replacement/ 1: At nearend]
5507 128 Interval: Others
The "Paper Supply Call Level: nn" SPs
specify the paper control call interval for the
referenced paper sizes. DFU
[00250 to 10000/1000/1 Step]
5507 132 Interval: A3
5507 133 Interval: A4
5507 134 Interval: A5
5507 141 Interval: B4
5507 142 Interval: B5
5507 160 Interval: DLT
5507 164 Interval: LG
5507 166 Interval: LT
5507 172 Interval: HLT
5515*
SC/Alarm Setting
With @Remote in use, these SP codes can be set to issue an SC call when
an SC error occurs. If this SP is switched off, the SC call is not issued when
an SC error occurs.
001 SC Call
[0 or 1 / 1 / 1] 0: OFF 1: ON
002 Service Parts Near End Call
[0 or 1 / 0 / 1] 0: OFF 1: ON
003 Service Parts End Call