SP Tables
M047 3-48 SM Appendix
5824
NVRAM Upload
Uploads the UP and SP mode data (except for counters and the serial
number) from NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents
a software module accessing the NVRAM during the upload.
5825
NVRAM Download
Downloads the content of a flash memory card to the NVRAM on the control
board.
5828
Network Setting
This machine supports both Internet Protocols IPv4 and IPv6. IPv6 is the
next generation protocol designed by the IETF to replace IPV4. IPv6 adds
many improvements such as routing and network auto-configuration.
5828 050 1284 Compatible
Enables and disables bi-directional communication on
the parallel connection between the machine and a
computer.
[0 to 1 / 1 / -]
0:Off, 1: On
5828 052 ECP
Disables and enables the ECP feature (1284 Mode) for
data transfer.
[0 to 1 / 1 /-]
0: Disabled
1: Enabled
5828 065 Job Spooling
Switches job spooling spooling on and off.
0: No spooling, 1: Spooling enabled
To Next Page
