Section 3: the voice prompt for the wrong password. It will be broadcasted when the
wrong password is used. Normal broadcasting can be carried out with this section.
Section 4: the voice prompt for dialing to an external telephone. It will be broadcasted
when x-Messenger dials an external telephone. Normal broadcasting can be carried out with this section.
3.Usage of the five special sections
For example: users can use the five message sections as follows:
Step I:
Record section 0 as Please enter No. 0 key and receive the information.
Record section 1 as Please enter the password for confirmation.
Record section 2 as Correct password. Please enter the control code to control.
Record section 3 as Wrong password. Please re-enter.
Record section 4 as Emergency. Please enter the password to control.
Record section 5 as Emergency. Gas leakage.
Step II:
When a user dials x-Messenger, x-Messenger will answer the telephone automatically and broadcast-Please
enter the password for confirmation, then the user enters the x-Messenger password.
A. If the entered password is correct, x-Messenger will then broadcast-Correct password.
Please enter the control code to control. Then the user can control the equipment
by the use of the telephone.
B.If the entered password is not correct, the x-Messenger will broadcast-Wrong password.
Please re-enter. Then the system will repeatedly broadcast-Please enter the
password for confirmation.
Step III:
When x-Messenger dials an external telephone number(pre-set in sms message output block of your
program), it will broadcast the pre-set message such as section 5-Emergency, Gas leakage. Together with
section 4-Emergency, Please enter the password to control.
A. When the user enters the correct password, the voice system will broadcast
section 2-Correct password. Please enter the control code to control and then
repeatedly broadcast section 5-Emergency, Gas leakage. At this time the user can
take control of connected equipment in real time by the use of the telephone.
B.When the user enters a wrong password, the voice system will broadcast section
3-Wrong password. Please re-enter. And then it will broadcast section 4 and section
5 repeatedly.
Password protection is according to the x-Messenger settings, if there is no password for x-Messenger, it will
broadcast the alarm voice without section 2.
Notes:
1. x-Messenger dialing an external telephone, if there is no answer or a password is not entered within the
To Next Page
Loading...
