108 Rockwell Automation Publication 2713P-UM001G-EN-P - May 2022
Chapter 7
To restore the terminal to its default state, follow these steps.
1. Cycle power to the terminal.
The Allen-Bradley logo displays during startup.
2. Wait a few seconds, and then touch the Allen-Bradley logo when the
copyright line becomes brighter.
Copyright ©2017 Rockwell Automation
The normal startup is suspended so the restore procedure can initiate.
You are asked if you want to restore the terminal to its defaults.
3. To continue, tap Yes, or tap Cancel to resume a normal startup.
You are asked to confirm the removal of all user files such as applications.
4. To continue, tap Yes, or tap Cancel to resume a normal startup.
Progress messages appear on the screen during the restore operation.
When the restore is complete, the terminal performs a normal startup.
5. From the Settings menu, update the terminal network settings.
6. Download an application to the terminal by using the View Designer
application.
7. From the Settings menu, update any remaining terminal settings as
appropriate.
Refer to Disable Downloads to the Terminal on page 59
for details on how to
modify device configuration settings.
Dispose of the Terminal
These terminals contain heavy metals that can contaminate the earth. Therefore,
check with local health and sanitation agencies for ways to dispose this
equipment safely.
TIP Wait a few seconds before you touch the logo. If you touch the logo too
soon during startup, this error text is displayed under the copyright
line.
ERROR! FEHLER! ERREUR! ERRORE!
If this error text is displayed, cycle power to the terminal and wait a
few seconds longer before you touch the logo.
At the end of its life, collect the terminal separately from any unsorted municipal
waste.
To Next Page
Loading...
Need help?
General
