Rockwell Automation Publication 2713P-UM001G-EN-P - May 2022 39
Chapter 3
Configure Terminal Settings
Runtime Environment
During runtime, the PanelView™ 5310 terminal runs HMI projects. A project is
configured and downloaded to your terminal from the View Designer
application. The project launches each time that the terminal restarts.
The terminal exchanges data values with the controller, animates the displayed
data, and responds when you press keys or touch a screen or element on a screen.
During runtime, you can perform these tasks:
• Navigate screens and their graphic elements
• View and manage alarms
• View and perform operations on a trend chart
• Display error information
• Configure terminal settings and view diagnostic information
Topic Page Topic Page
Runtime Environment 39 Calibrate the Touch Screen 57
Enter Data With Virtual Keyboards 41 Disable Downloads to the Terminal 59
Log On to the Terminal 44 Change the HMI Device Name 60
Log Off of the Terminal 45 View the Firmware Revision 61
Settings Menu 45 Display Terminal Diagnostics 62
Configure the IP Address of the Terminal 48 Enable the VNC Server 63
Configure a DNS Address for the Terminal 50 Load an Application from Removable
Media
64
Configure the Ethernet Port 51 Reboot the Terminal 65
View the Network Diagnostics 52 Change the Date and Time 66
Use the Data Export Feature 53 View Information for the Configured
Controller
67
Adjust the Brightness of the Display 54 Manage Certificates 69
Configure the Display Screen Saver 55
To Next Page
Loading...
Need help?
General
