Rockwell Automation Publication 2713P-UM001G-EN-P - May 2022 7
Preface
This manual describes how to install, configure, operate, and troubleshoot the
PanelView™ 5310 terminals. This manual does not provide procedures on how to
create applications that run on the terminals, or ladder logic that runs in the
controller.
Other tasks that you must do include:
• Configure the Ethernet settings and update the firmware of the terminal.
• Create a project by using the Studio 5000 View Designer® application.
• Create control logic for the controller by using the Studio 5000 Logix
Designer® application.
Summary of Changes
This manual contains new and updated information as indicated in the following
table.
Package Contents
The PanelView 5310 terminals ship with these items.
IMPORTANT You must configure the Ethernet settings and update the firmware
before you can download a View Designer project and use the
terminal. See Initial Startup
on page 37.
Topic Page
Added a new graphic that depicts acceptable and unacceptable mounting positions. 23
Item Description
Hardware • Mounting levers for panel installation
• Removable DC power terminal block
Documents • PanelView 5310 Terminals Product Information, publication 2713P-PC001
• Cutout Templates for PanelView 5310 Terminals, publication 2713P-DS001
To Next Page
Loading...
