Rockwell Automation Publication 2713P-UM001G-EN-P - May 2022 19
Chapter 2
Install the PanelView 5310 Terminal
Topic Page
Installation Precautions 20
Mounting Considerations 23
Mounting Clearances 23
Panel Guidelines 24
Panel Cutout Dimensions 24
Terminal Dimensions 25
Prepare for Panel Mounting 26
Mount the Terminal in a Panel 29
Remove and Replace Power Terminal Block 32
Connect Power 33
Connect to a Network 34
Initial Startup 37
ATTENTION: Do not use a PanelView™ 5310 terminal for emergency stops or
other controls critical to the safety of personnel or equipment. Use separate
hard-wired operator interface devices that do not depend on solid-state
electronics.
To Next Page
Loading...
Need help?
General
