56 Rockwell Automation Publication 2713P-UM001G-EN-P - May 2022
Chapter 3
3. To add or remove the check mark next to Turn on Screen Saver, tap the
checkbox.
The option is enabled when the box is checked.
4. Tap the Wait field.
The virtual numeric keyboard opens.
5. Enter the number of continuous, idle minutes from 1…5999 to wait before
activating the screen saver.
The default is 10 minutes.
6. Tap O K .
7. Tap the Brightness (%) field.
The virtual numeric keyboard opens.
8. Enter the value for the brightness in increments from 1…100%.
9. Tap O K .
10. To close the window, tap .
To Next Page
Loading...
