51
Creating a Patch
Quick Start
Saving Patches (PATCH Write)
After you’ve named your patch, save it as follows.
1
Make sure that the patch you want to save is selected.
2
Touch <
▼
MENU> in the upper left area of the display.
A pulldown menu appears.
fig.Q-38a_60
3
Touch <PATCH Write> in the pulldown menu.
The PATCH Write window appears.
fig.Q-39_60
4
Choose the save destination (Destination). Turn the VALUE dial to
select an unused patch number.
* The patch you select (as the save destination) will be erased when it is overwritten by the
newly saved patch.
• To move through the patches more quickly, you can hold down [SHIFT] and turn
the VALUE dial.
• If you touch < Compare > you’ll be able to play the keyboard to audition the
patch that is at the save destination you choose (the Compare function).
• If you touch < List >, the PATCH List window will open, allowing you to choose
a save-destination patch from a list.
5
Touch <Execute>.
When shipped from the
factory, the V-Synth already
contains a collection of
patches. When you save your
own patches, you replace the
factory patches. If you wish to
restore the original patches,
use the Factory Reset operation
(p. 147).
Reference_e.book 51 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
