Roland V-Synth - Page 89

88
Creating a Patch
Fat (ANALOG)
fig.03-16_50
Fat ★◆
Emphasizes the low-frequency region of the sound.
Value: 0–127
Fat KF (Fat Key Follow)
Specifies the amount by which the fat value will be affected by the
key you play.
Value: -200– +200
Fat LFO Depth ★◆
Specifies how deeply the LFO will affect fat.
Value: -63– +63
In this screen you can make settings for the envelope that affects
the fat. For details on envelope settings, refer to “Making
Envelope Settings” (p. 94).
Detune (ANALOG, when using Sub OSC)
fig.08_50
Detune
Specifies the detuning (pitch difference) of the sub-oscillator. This
setting is valid if the Sub-Oscillator Octave Select is set to “-2, -1, or
0.”
Value: -63–+63
Detune KF (Detune Key Follow)
Specifies the amount by which the detune value will be affected by
the key you play.
Value: -200- +200
Detune LFO Depth
Specifies how deeply the LFO will affect detune.
Value: -63- +63
In this screen you can make settings for the envelope that affects
the detune. For details on envelope settings, refer to “Making
Envelope Settings” (p. 94).
Detune
(ANALOG, when SUPER-SAW is selected)
fig.08_50
Detune
Adjust the degree of pitch detuning. As the knob is rotated to the
right, the pitch will be detuned more greatly, making the sound
more spacious.
Value: -63–+63
Detune KF (Detune Key Follow)
Specifies the amount by which the detune value will be affected by
the key you play.
Value: -200- +200
Detune LFO Depth
Specifies how deeply the LFO will affect detune.
Value: -63- +63
In this screen you can make settings for the envelope that affects
the detune. For details on envelope settings, refer to “Making
Envelope Settings” (p. 94).
Reference_e.book 88 ページ ２００５年３月１０日 木曜日 午後５時６分