89
Creating a Patch
Creating a Patch
Mix
(ANALOG, when SUPER-SAW is selected)
fig.08_50
Mix
Adjust the volume of the detuned sounds relative to the central
sound. As the knob is rotated to the right, the detuned sounds will
become louder, making the sound thicker.
Value:
-63–+63
Mix KF (Mix Key Follow)
Specifies the amount by which the Mix value will be affected by the
key you play.
Value:
-200- +200
Mix LFO Depth
Specifies how deeply the LFO will affect Mix.
Value:
-63- +63
In this screen you can make settings for the envelope that affects
the Mix. For details on envelope settings, refer to
“Making
Envelope Settings”
(p. 94).
Harmonics (ANALOG, when
FEEDBACK-OSC is selected)
fig.08_50
Harmonics
Vary the sound of the harmonics.
Value:
-63–+63
Harmonics KF (Harmonics Key Follow)
Specifies the amount by which the Harmonics value will be affected
by the key you play.
Value:
-200- +200
Harmonics LFO Depth
Specifies how deeply the LFO will affect Harmonics.
Value:
-63- +63
In this screen you can make settings for the envelope that affects
the Harmonics. For details on envelope settings, refer to
“Making Envelope Settings”
(p. 94).
You can create distinctive effects by applying an LFO or
envelope to HARMONICS or FBK AMOUNT.
FBK Amount (ANALOG, when
FEEDBACK-OSC is selected)
fig.08_50
FBK Amount (Feedback Amount)
Adjust the amount of feedback to adjust the level of the harmonics.
Value:
-63–+63
Amount KF (Amount Key Follow)
Specifies the amount by which the feedback value will be affected by
the key you play.
Value:
-200- +200
Amount LFO Depth
Specifies how deeply the LFO will affect feedback.
Value:
-63- +63
In this screen you can make settings for the envelope that affects
the feedback. For details on envelope settings, refer to
“Making
Envelope Settings”
(p. 94).
You can create distinctive effects by applying an LFO or
envelope to HARMONICS or FBK AMOUNT.
Reference_e.book 89 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
