90
Creating a Patch
X-MOD
(ANALOG, when X-MOD-OSC is selected)
fig.08_50
X-MOD (Cross Modulation Depth)
Cross Modulation is when OSC2 modify the frequency of OSC1. [X-
MOD] adjusts the depth of this Cross Modulation. As the knob is
rotated toward the right, the sound of OSC1 will become more
complex, with more overtones, and will be suitable for creating
metallic sounds and sound effects.
Value:
-63–+63
“Cross Modulation Depth” can be selected only for OSC1.
“Cross Modulation Depth” does nothing if OSC2 is off.
X-MOD KF (X-MOD Key Follow)
Specifies the amount by which the Cross Modulation value will be
affected by the key you play.
Value:
-200- +200
X-MOD LFO Depth
Specifies how deeply the LFO will affect Cross Modulation.
Value:
-63- +63
In this screen you can make settings for the envelope that affects
the Cross Modulation. For details on envelope settings, refer to
“Making Envelope Settings”
(p. 94).
Time (PCM)
fig.03-17_50
Time
★◆
This sets the range of change in playback speed (time).
Value:
-63– +63
<How the Time parameter is related to playback speed>
Time KF (Time Key Follow)
Specifies the amount by which the time value will be affected by the
key you play.
Value:
-200– +200
Time Offset
Specifies the basic speed for a time value of “0”.
Value
BWD:
Specifies a backward direction.
ZERO:
Specifies a pause.
FWD:
Specifies a forward direction.
Time LFO Depth
★◆
Specifies how deeply the LFO will affect time.
Value:
-63– +63
In this screen you can make settings for the envelope that affects
the time. For details on envelope settings, refer to
“Making
Envelope Settings”
(p. 94).
Time
-40 -20 0 20 40
FWD
Reverse
playback
Stop Normal
speed
2x speed 4x speed
ZERO -2x speed Reverse
playback
Stop Normal
speed
2x speed
BWD 4x speed -2x speed Reverse
playback
Stop Normal
speed
Reference_e.book 90 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
