Rotax 914 series Installation Manual

page 140
July 01/2008
Effectivity: 914 Series
Edition 2 / Rev. 0
d04283
INSTALLATION MANUAL
BRP-Rotax
- Check exhaust system for security and free of blockage
- Preheat engine in cold weather.
Conduct test run:
See Operators Manual 914 section 10.3
Verification of the throttle lever detent for max. continuous power:
Performance check in accordance with Operator's Manual.
If nominal performance won't be reached or is in excess of, examination of the installation and
engine will be necessary. Consult Maintenance Manual 914.
■ CAUTION: Don't conduct any test flights before all faults have been traced and found.
- Make an entry of the details and test results into the engine log book.

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm