EasyManuals Logo

Rotax 914 series Installation Manual

Rotax 914 series
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Effectivity: 914 Series
Edition 2 / Rev. 0
d04275
page 27
July 01/2008
BRP-Rotax
INSTALLATION MANUAL
8) Technical data
To maintain clarity, only data relevant for engine installation and operation will be stated in
the Manual.
NOTE: Connecting dimensions, filling capacities, drive and reduction ratios, electric
output etc. can be found in the respective chapter of engine installation or
other relevant engine documentation. (see section 4.4)
8.1) Operating limits
1. Engine speed .......................... see Operators Manual 914 Series, sec. 10.1.
2. Manifold pressure:................. see Operators Manual 914 Series, sec. 10.1.
3. Acceleration: .......................... see Operators Manual 914 Series, sec. 10.1.
4. Critical flight level ................. see Operators Manual 914 Series, sec. 10.1.
5. Oil pressure: .......................... see Operators Manual 914 Series, sec. 10.1.
6. Oil temperature: ..................... see Operators Manual 914 Series, sec. 10.1.
7. Cyl. head temperature: .......... see Operators Manual 914 Series, sec. 10.1.
8. Exhaust gas temperature: ..... see section 11.1
9. Airbox temperature: .............. see section 16.1
10. Range of starting temperature: see Operators Manual 914 Series, sec. 10.1
11.Fuel pressure: ........................ see Operators Manual 914 Series, sec. 10.1.
12.Banking of plane deviation from the effective vertical:
See Operators Manual 914 Series, sec. 10.1.
The engine design is for a conventional, non-aerobatic, fixed wing tractor or pusher
type configuration with the oil return port in the optimum position (see section 13.5).
With this consideration the engine is properly lubricated in all flight profiles.
The resulting bank angle b (depending on acceleration/deceleration) may never
exceed the max. bank angle.
NOTE: Pitch or role angle α is not equal with β, except stabilized condition
(without acceleration).
Fig. 6
08405
max. 40°
max. 40°
F1
Fr
+/
- 40°
F2
Fig. 7
α pitch or roll
β current bank angle
F1 gravity
F2 acceleration
Fr result of F1 and F2
07191

Table of Contents

Other manuals for Rotax 914 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 914 series and is the answer not in the manual?

Rotax 914 series Specifications

General IconGeneral
Bore79.5 mm
Stroke61 mm
Compression Ratio9.0:1
Cooling SystemLiquid-cooled cylinder heads, air-cooled cylinders
Redline5800 rpm
Engine Type4-cylinder, 4-stroke
Fuel TypeAvgas 100LL
Oil SystemDry sump
Fuel Systemfuel injection
TBO (Time Between Overhauls)2000 hours
Displacement1.211 liters (1211 cc)
Power Output84.6 kW (115 hp) at 5, 800 rpm

Related product manuals