Effectivity: 914 Series
Edition 2 / Rev. 0
d04274
page 13
July 01/2008
BRP-Rotax
INSTALLATION MANUAL
- In addition to observing the instructions in our Manual, general safety and accident
preventative measures, legal regulations and regulations of any aeronautical
authority must be observed.
- Where differences exist between this Manual and regulations provided by any
authority, the more stringent regulation should be applied.
- This engine can equipped with an air pump. The safety warning accompanying the
air pump must be given to the owner/operator of the aircraft into which the air pump
is installed.
4.3) Instruction
Engines require instructions regarding their application, use, operation, maintenance
and repair.
- Technical documentation and directions are useful and necessary complementary
elements for personal instruction, but can by no means substitute theoretical and
practical instructions.
- These instructions should cover explanation of the technical context, advice for
operation, maintenance, use and operational safety of the engine.
- All technical directives relevant for safety are especially emphasized. Pass on
safety instructions to other users, without fail.
- This engine must only be operated with accessories supplied, recommended and
released by BRP-Rotax. Modifications are only allowed after consent by the engine
manufacturer.
■ CAUTION: Spare parts must meet with the requirements defined by the engine
manufacturer. This is only warranted by use of GENUINE ROTAX
spare parts and/or accessories (see Illustrated Parts Catalog).
They are available only at the authorized BRP-Rotax Distribution-
and Service Centers.
The use of anything other than genuine ROTAX spare parts and/or
accessories will render any warranty relating to this engine null and
void (see Warranty Conditions).
▲ WARNING: Engine and gear box are delivered in "dry" conditions (without
operating fluids). Before putting engine in operation it must be filled
with oil. Use only oil as specified (consult Operators Manual or
alternatively SI-914-019 "Selection of suitable operating fluids", last
valid issue)).
To Next Page
Loading...
Need help?
General
