page 14
July 01/2008
Effectivity: 914 Series
Edition 2 / Rev. 0
d04274
INSTALLATION MANUAL
BRP-Rotax
▲ WARNING: Exclusively use tools and supplementary materials as listed in the
Illustrated Parts Catalog.
▲ WARNING: This Manual for engine installation is only part of the Technical
Documentation and will be supplemented by the respective Opera-
tors Manual, Maintenance Manual and Spare Parts List.
Pay attention to references to other documentation, found in various
parts of this Manual.
4.4) Technical documentation
The information given in the
- Installation Manual
- Operators Manual
- Maintenance Manual (Line Maintenance)
- Maintenance Manual (Heavy Maintenance)
- Overhaul Manual
- Illustrated Parts Catalog (IPC)
- Alert Service Bulletin
- Service Bulletin
- Service Instruction
- Service Letter
- User Manual
are based on data and experience that are considered applicable for professionals
under normal conditions.
The rapid technical progress and variations of installation might render present laws
and regulations inapplicable or inadequate.
The illustrations in this Manual are mere sketches and show a typical arrangement.
They may not represent the actual part in all its details but depict parts of the same
or similar function. Therefore deduction of dimensions or other details from illustra-
tions is not permitted.
Some measurements are given in the drawings, these are manufacturing dimensions
and are subject to corresponding tolerances.
To Next Page
Loading...
Need help?
General
